|
 •
Cuchillo de práctica en aluminio de 12" modelo Daga $30 (balanceados) |
 •
Cuchillo de práctica en aluminio de 12" modelo Tanto $30 (balanceados) |
|
 •
Cuchillo de práctica en aluminio de 7.5" modelo Neck Knife $25 |
|
Pinute de práctica en aluminio 26 1/2" $70 |
 |
Barong de práctica en aluminio 26 3/4" $75 |
 |
Palo de ratán 28" $10 |
 |
• Camiseta Filipino Combat Systems Latin America & Caribbean Head Quarters $20
*****FX-636T FOX KUKU HANUMAN FIGHTING KARAMBIT TEFLON COATED BLADE Derespina 636T ($170)
Blades: Stainless steel N690
Co cobalt vanadium with an hardness of HRC 58-60. Teflon coated finish available
in Black matt (636T). Length mm80, thickness mm4.
Handles: CNC machined G10 coarse texture lenght mm130 including ring on the
back.
Sheath/clip: Made in USA with KYDEX material carry on the back the new BLADE
TECH MOLLE clip that can be used on regular belt or in tactical MOLLE system
jacket, back packs.
Comments from Blade Forum:
The proper name of the alloy is N690. It is made by Bohler in their Austria,
mill which is why it is more often found on European knives than on knives of
other countries. The composition is similar to that of 440C with similar amounts
of Carbon, Chromium, and Molybdenum. However, N690 also contains cobalt and
a small amount of Vanadium. These additions enhance the properties of the alloy.
I got a chance to try N690
in a Benchmade Monochrome.
When I ran side by side manila rope cutting comparisons, I found the edge retention
of N690 to be similar to that of 154CM and VG10 when all three were hardened
to 59HRC.
I also found that the N690 blade sharpened almost as easily as AUS8 and that it took an edge that was every bit as fine. (Small amounts of Vanadium are said to produce alloys with finer grain structure, which allows the blade to take a finer edge.) Seemed to be true to me in this case.
I would look at N690 for the same uses I would look at 154CM or VG10. I wouldn't choose it for a chopper blade (Tomahawk? not if it will be used to chop into wood, Chop flesh? maybe). But would make an awesome skinning blade.
If I found another design
I liked in N690 I would certainly buy it. Excellent blade alloy!
Español
Para ordenar cualquier producto
de esta página solo debe escribir un email a gurocpl@fcskalipr.com con
los productos que interesa comprar, cantidad, su nombre y dirección.
Usted recibirá una factura vía email de batuman@prtc.net.
En esta factura personalizada estará incluido el costo de manejo y franqueo
para la dirección que fue provista más el 3% del total de los
productos por el uso de PAYPAL por procesar la transacción. Usted puede
pagar esta factura con PAYPAL o tarjeta de crédito. Si desea pagar de
alguna otra manera, siéntase en la libertad de escribirnos y le dejaremos
saber si es aceptable. Su pedido será enviado a la mayor brevedad posible
luego de que se confirme el pago.
English
To order any product of this
page send us an email to gurocpl@fcskalipr.com with the product name, amount
and your name and address. You will receive in return an invoice via email from
batuman@prtc.net.
In this invoice you will find the cost of shipping & handling for the address
provided plus 3% of the total of products from the PAYPAL used to process the
transaction. You can pay with PAYPAL or credit card. If you wish to pay in some
other way, feel free to write us and we will let you know if it could be accepted.
Your order will be sent as soon as possible after the payment is confirmed.
•
Kerambit PNK1 de práctica en aluminio $40